FREE SHIPPING ON ORDERS OVER $100

Popular right now
Lots of people have looked at this recently

Selling fast!
Grab yours while you can
Marine Wholesale Supply is a US-Based, Authorized Dealer
Airmar  |  SKU: MWS-84961

Airmar MM-8G Mix Match Cable f/600W Non-CHIRP Transducers [MM-8G]

$87.99 USD $97.50
Shipping calculated at checkout.

Orders placed before 4pm EST will be shipped in the same day

MM-8G Mix & Match Cable for 600W Non-CHIRP Transducers

Mix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable.

The short pigtail attached to the transducer ends in an Airmar 5-pin female connector. The adapter cables have a matching Airmar 5-pin male connector (shown below) at one end and the correct connector for a specific brand of electronics at the other end.

Both parts are needed for installation. If the user changes equipment brand at some later time, the transducer can be left in place and the adapter cable replaced.

Mix and Match 600W transducers include the B117, B45, B60, P319, P66*, P79, SS505, and SS60. (* not all models)

A 12m (40') extension cable (part MM-5P-5P) is available with one male and one female 5-pin connector.

Note that 600W Mix and Match cables cannot be used with 1kw transducers.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Let customers speak for us

from 15 reviews
Perko Fitting

Arrived very quick waiting for a warm up so I can install it thanks

David Schrage
Perko 2" Thru-Hull Fitting w/Pipe Thread Bronze MADE IN THE USA [0322009PLB]
Perko 2" Thru-Hull Fitting w/Pipe Thread Bronze MADE IN THE USA [0322009PLB]
Bilge plug

Ordered a garboard bilge drain plug
Nice piece ,came quickly.

Carlton Bavor
GROCO Garboard Drain w/Inside T-Handle Plug [TD-750]
GROCO Garboard Drain w/Inside T-Handle Plug [TD-750]

worked great plus fast shipping

john b hengemihle
Faria Temp Sender 3/8" NPTF America Single Standard [90403]
Faria Temp Sender 3/8" NPTF America Single Standard [90403]
Fireboy co detector

Solid construction, delivered promptly

David Bell
Fireboy-Xintex CO Alarm 12/24V DC - Black [CMD6-MD-BR]
Fireboy-Xintex CO Alarm 12/24V DC - Black [CMD6-MD-BR]
Lenco Trim Tab Actuator

Easy to install. Works great!

Brian Ferguson
Lenco 101 Standard Actuator - 12V - 2-1/4" Stroke [15054-001]
Lenco 101 Standard Actuator - 12V - 2-1/4" Stroke [15054-001]
toadfish tool

works great!

VH bibee
Toadfish Frogmore Shrimp Cleaner [1009]
Toadfish Frogmore Shrimp Cleaner [1009]
new charger

Had to get a new charger for my Garmin watch, This one was in stock and came fast, and I have already charged the watch.

Judy Wilson
Garmin Charging/Data Clip f/Forerunner 10 & 15 - Black [010-11029-04]
Garmin Charging/Data Clip f/Forerunner 10 & 15 - Black [010-11029-04]

Awesome. Everything from start to finish was as easy as I would hope it to be

kelley marriott
Raritan 12-Gallon Hot Water Heater w/Heat Exchanger - 120v [171211]
Raritan 12-Gallon Hot Water Heater w/Heat Exchanger - 120v [171211]

Great quality product

Raul Garza
Lee's Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.660" O.D. Pipe [RA5203BK]
Lee's Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.660" O.D. Pipe [RA5203BK]
Works with Faria multi gauge

I picked up a faria multi gauge to monitor engine vitals. The stock sending unit i had, did not register on gauge. Picked this one up from marine wholesale. plugged it in and works flawlessly.

Chance Hampton
Faria Oil Pressure Sender - Single Station [90512]
Faria Oil Pressure Sender - Single Station [90512]

Friendly and fast customer service.

Igor Risk
Blue Sea 7270 250A C-Series Triple Pole Toggle DC Circuit Breaker [7270]
Blue Sea 7270 250A C-Series Triple Pole Toggle DC Circuit Breaker [7270]
Customer review

Best customer service.

Orlando Olivares
Safe-T-Alert Heavy Duty Trailer Dock/Jack Stand Pad [SA-6200]
Safe-T-Alert Heavy Duty Trailer Dock/Jack Stand Pad [SA-6200]

Great condition works perfectly

Rockne Winner
Attwood Anchor Lift System [13710-4]
Attwood Anchor Lift System [13710-4]
Awesome service

Received my item in 2 days great job!!!

Island Packet and Seaward Yachts Martinez
TACO Latch-tite Stainless Steel 2-7/16" Square [F16-2525]
TACO Latch-tite Stainless Steel 2-7/16" Square [F16-2525]

Own time easy order procedure

richard tilley
Mustang Re-Arm Kit F 33g - Automatic/Manual [MA7113-0-0-102]
Mustang Re-Arm Kit F 33g - Automatic/Manual [MA7113-0-0-102]
Airmar

Airmar MM-8G Mix Match Cable f/600W Non-CHIRP Transducers [MM-8G]

$87.99 USD $97.50

MM-8G Mix & Match Cable for 600W Non-CHIRP Transducers

Mix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable.

The short pigtail attached to the transducer ends in an Airmar 5-pin female connector. The adapter cables have a matching Airmar 5-pin male connector (shown below) at one end and the correct connector for a specific brand of electronics at the other end.

Both parts are needed for installation. If the user changes equipment brand at some later time, the transducer can be left in place and the adapter cable replaced.

Mix and Match 600W transducers include the B117, B45, B60, P319, P66*, P79, SS505, and SS60. (* not all models)

A 12m (40') extension cable (part MM-5P-5P) is available with one male and one female 5-pin connector.

Note that 600W Mix and Match cables cannot be used with 1kw transducers.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
View product
Back to top